product_banner

Products

  • Pulse Control 2 Phase Closed Loop Stepper Drive T60Plus

    Pulse Control 2 Phase Closed Loop Stepper Drive T60Plus

    T60PLUS closed loop stepper drive, with encoder Z signal input and output functions. It integrates a miniUSB communication port for easy debugging of related parameters.

    T60PLUS matches closed loop stepper motors with Z signal below 60mm

    •  Pulse mode: PUL&DIR/CW&CCW

    •  Signal level: 5V/24V

    • l Power voltage: 18-48VDC, and 36 or 48V recommended.

    •  Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,

    •  electronic assembly equipment etc.

  • Pulse Control 2 Phase Closed Loop Stepper Drive T86

    Pulse Control 2 Phase Closed Loop Stepper Drive T86

    The Ethernet fieldbus-controlled stepper drive EPR60 runs the Modbus TCP protocol based on standard Ethernet interface
    T86 closed loop stepper drive, based on 32-bit DSP platform, built-in vector control technology and servo demodulation function, combined with the feedback of closed-loop motor encoder, makes the closed loop stepper system has the characteristics of low noise,
    low heat, no loss of step and higher application speed, which can improve the performance of intelligent equipment system in all aspects.
    T86 matches closed- loop stepper motors below 86mm.

    •  Pulse mode: PUL&DIR/CW&CCW

    •  Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.

    •  Power voltage: 18-110VDC or 18-80VAC, and 48VAC recommended.

    •  Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,

    •  electronic assembly equipment etc

  • Hybrid 2 Phase Closed Loop Stepper Drive DS86

    Hybrid 2 Phase Closed Loop Stepper Drive DS86

    DS86 digital display closed-loop stepper drive, based on a 32-bit digital DSP platform, with built-in vector control technology and servo demodulation function. The DS stepper servo system has the characteristics of low noise and low heating.

    DS86 is used to drive the  two-phase closed-loop motor below 86mm

    •  Pulse mode: PUL&DIR/CW&CCW

    •  Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.

    •  Power voltage: 24-100VDC or 18-80VAC, and 75VAC recommended.

    •  Typical applications: Auto-screwdriving machine, wire-stripping machine, labeling machine, engraving machine, electronic assembly equipment etc.

  • Pulse Control 3 Phase Closed Loop Stepper Drive NT110

    Pulse Control 3 Phase Closed Loop Stepper Drive NT110

    NT110 digital display 3 phase closed loop stepper drive, based on 32-bit digital DSP platform, built-in vector control technology and servo demodulation function, makes the closed loop stepper system have the characteristics of low noise and low heat.

    NT110 is used to drive 3 phase 110mm and 86mm closed loop stepper motors,RS485 communication is available.

    •  Pulse mode: PUL&DIR/CW&CCW

    •  Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.

    •  Power voltage: 110-230VAC, and 220VAC is recommended.

    •  Typical applications: welding machine, wire-stripping machine, labeling machine, carving machine, electronic assembly equipment etc.

  • Phase Closed Loop Stepper Motor Series

    Phase Closed Loop Stepper Motor Series

    ● Built-in high-resolution encoder, optional Z signal.

    ● The lightweight design of the AM series reduces the installation.

    ● Space of the motor.

    ● Permanent magnet brake is optional, Z-axis brake is faster.

  • Phase Closed Loop Stepper Motor Series

    Phase Closed Loop Stepper Motor Series

    ● Built-in high-resolution encoder, optional Z signal.

    ● The lightweight design of the AM series reduces the installation.

    ● Space of the motor.

    ● Permanent magnet brake is optional, Z-axis brake is faster.

  • Pulse Control 2 Phase Closed Loop Stepper Drive T42

    Pulse Control 2 Phase Closed Loop Stepper Drive T42

    T60/T42 closed loop stepper drive, based on 32-bit DSP platform, built-in vector control technology and servo demodulation function,

    combined with the feedback of closed-loop motor encoder, makes the closed loop stepper system has the characteristics of low noise,

    low heat, no loss of step and higher application speed, which can improve the performance of intelligent equipment system in all aspects.

    T60 matches closed- loop stepper motors below 60mm, and T42 matches closed- loop stepper motors below 42mm.  •

    •l Pulse mode: PUL&DIR/CW&CCW

    • Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.

    • Power voltage: 18-68VDC, and 36 or 48V recommended.

    • Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,

    • electronic assembly equipment etc.