-
Fieldbus Communication Slave IO Module
EIO1616 is a digital input and output extension module developed by Rtelligent based on EtherCAT bus communication. EIO1616 has 16 NPN single-ended common anode input ports and 16 common cathode output ports, 4 of which can be used as PWM output functions. In addition, the series of extension modules have two installation ways for customers to choose.
-
5-phase Open Loop Stepper Motor Series
Compared with the ordinary two-phase stepper motor, the five-phase stepper motor has a smaller step angle. In the case of the same rotor structure,
-
PLC product presentation
The RX3U series controller is a small PLC developed by Rtelligent technology, Its command specifications are fully compatible with Mitsubishi FX3U series controllers, and its features include supporting 3 channels of 150kHz high-speed pulse output, and supporting 6 channels of 60K single-phase high-speed counting or 2 channels of 30K AB-phase high-speed counting.
-
Pulse Control 2 Phase Closed Loop Stepper Drive T60Plus
T60PLUS closed loop stepper drive, with encoder Z signal input and output functions. It integrates a miniUSB communication port for easy debugging of related parameters.
T60PLUS matches closed loop stepper motors with Z signal below 60mm
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 5V/24V
• l Power voltage: 18-48VDC, and 36 or 48V recommended.
• Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,
• electronic assembly equipment etc.
-
Pulse Control 2 Phase Closed Loop Stepper Drive T86
The Ethernet fieldbus-controlled stepper drive EPR60 runs the Modbus TCP protocol based on standard Ethernet interface
T86 closed loop stepper drive, based on 32-bit DSP platform, built-in vector control technology and servo demodulation function, combined with the feedback of closed-loop motor encoder, makes the closed loop stepper system has the characteristics of low noise,
low heat, no loss of step and higher application speed, which can improve the performance of intelligent equipment system in all aspects.
T86 matches closed- loop stepper motors below 86mm.• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 18-110VDC or 18-80VAC, and 48VAC recommended.
• Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,
• electronic assembly equipment etc
-
Hybrid 2 Phase Closed Loop Stepper Drive DS86
DS86 digital display closed-loop stepper drive, based on a 32-bit digital DSP platform, with built-in vector control technology and servo demodulation function. The DS stepper servo system has the characteristics of low noise and low heating.
DS86 is used to drive the two-phase closed-loop motor below 86mm
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 24-100VDC or 18-80VAC, and 75VAC recommended.
• Typical applications: Auto-screwdriving machine, wire-stripping machine, labeling machine, engraving machine, electronic assembly equipment etc.
-
Pulse Control 3 Phase Closed Loop Stepper Drive NT110
NT110 digital display 3 phase closed loop stepper drive, based on 32-bit digital DSP platform, built-in vector control technology and servo demodulation function, makes the closed loop stepper system have the characteristics of low noise and low heat.
NT110 is used to drive 3 phase 110mm and 86mm closed loop stepper motors,RS485 communication is available.
• Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 110-230VAC, and 220VAC is recommended.
• Typical applications: welding machine, wire-stripping machine, labeling machine, carving machine, electronic assembly equipment etc.
-
Phase Closed Loop Stepper Motor Series
● Built-in high-resolution encoder, optional Z signal.
● The lightweight design of the AM series reduces the installation.
● Space of the motor.
● Permanent magnet brake is optional, Z-axis brake is faster.
-
Phase Closed Loop Stepper Motor Series
● Built-in high-resolution encoder, optional Z signal.
● The lightweight design of the AM series reduces the installation.
● Space of the motor.
● Permanent magnet brake is optional, Z-axis brake is faster.
-
Pulse Control 2 Phase Closed Loop Stepper Drive T42
T60/T42 closed loop stepper drive, based on 32-bit DSP platform, built-in vector control technology and servo demodulation function,
combined with the feedback of closed-loop motor encoder, makes the closed loop stepper system has the characteristics of low noise,
low heat, no loss of step and higher application speed, which can improve the performance of intelligent equipment system in all aspects.
T60 matches closed- loop stepper motors below 60mm, and T42 matches closed- loop stepper motors below 42mm. •
•l Pulse mode: PUL&DIR/CW&CCW
• Signal level: 3.3-24V compatible; serial resistance not required for the application of PLC.
• Power voltage: 18-68VDC, and 36 or 48V recommended.
• Typical applications: Auto-screwdriving machine, servo dispenser, wire-stripping machine, labeling machine, medical detector,
• electronic assembly equipment etc.
-
One -drive-two Stepper Drive R42-D
R42-D is a customized drive for two-axis synchronization application
In conveying equipment, there are often two – axis synchronization application requirements.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• ignal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
-
One -drive-two Stepper Drive R60-D
Two-axis synchronization appication is often required on the conveying equipment. R60-D is the two-axis synchronization
specific drive customized by Rtelligent.
Speed control mode: the ENA switching signal controls the start-stop, and the potentiometer controls speed.
• Signal level: IO signals are connected to 24V externally
• Power supply: 18-50VDC
• Typical applications: conveying equipment, inspection conveyor, PCB loader
• Using the TI delicated dual-core DSP chip, R60-D drives the two-axis motor independently to avoid the interference whthin
• the back electromotive force and achieve independent operation and synchronized movement.
