-
Switch Stepper Drive Series
IO series switch stepper drive, with built-in S-type acceleration and deceleration pulse train, only need switch to trigger
motor start and stop. Compared with speed regulating motor, IO series of switching stepper drive has the characteristics of stable start and stop, uniform speed, which can simplify the electrical design of engineers.
• ontrol mode: IN1.IN2
• Speed setting: DIP SW5-SW8
• Signal level: 3.3-24V Compatiable
• Typical appications: conveying equipment, inspection converyor, PCB loader
-
Advanced Pulse Control Digital Stepper Drive R86
Based on the new 32-bit DSP platform and adopting the micro-stepping technology and PID current control algorithm
design, Rtelligent R series stepper drive surpasses the performance of common analog stepper drive comprehensively.
The R86 digital 2-phase stepper drive is based on 32-bit DSP platform,with built-in micro-stepping technology & auto
tuning of parameters. The drive features low noise, low vibration, low heating and high-speed high torque output.
It is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL&DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment, etc.
-
Digital Stepper Driver R86mini
Compared with R86, the R86mini digital two-phase stepper drive adds alarm output and USB debugging ports. smaller
size, easier to use.
R86mini is used to drive two-phase stepper motors base below 86mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 24~100V DC or 18~80V AC; 60V AC recommended.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Digital Stepper Driver R110PLUS
The R110PLUS digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology &
auto tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output.It can fully play the performance of two-phase high-voltage stepper motor.
R110PLUS V3.0 version added the DIP matching motor parameters function, can drive 86/110 two-phase stepper motor.
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not necessary for the application of PLC.
• Power voltage: 110~230V AC; 220V AC recommended, with superior high-speed performance.
• Typical applications: engraving machine, labeling machine, cutting machine, plotter, laser, automatic assembly equipment,
• etc.
-
Advanced Pulse Control Digital Stepper Driver R130
The R130 digital 2-phase stepper drive is based on 32-bit DSP platform, with built-in micro-stepping technology & auto
tuning of parameters, featuring of low noise,low vibration, low heating and high-speed high torque output. It can be used
in most applications of stepper motor.
R130 is used to drive two-phase stepper motors base below 130mm
• Pulse mode: PUL & DIR
• Signal level: 3.3~24V compatible; series resistance not required for the application of PLC.
• Power voltage: 110~230V AC;
• Typical applications: engraving machine, cutting machine, screen printing equipment, CNC machine, automatic assembly
• equipment, etc.
-
High Performance 5 Phase Digital Stepper Drive 5R60
5R60 digital five-phase stepper drive is based on TI 32-bit DSP platform and integrated with the micro-stepping technology
and the patented five-phase demodulation algorithm. With the features of low resonance at low speed, small torque ripple
and high precision, it allows the five-phase stepper motor to deliver full performance benefits.
• Pulse mode: default PUL&DIR
• Signal level: 5V, PLC application requires string 2K resistor.
• Power supply: 18-50VDC, 36 or 48V recommended.
• Typical applications：dispenser, wire-cut electrical discharge machine, engraving machine, laser cutting machine,
• semiconductor equipment, etc
-
2-Phase Open Loop Stepper Motor Series
The stepper motor is a special motor specially designed for accurate control of position and speed. The biggest characteristic of stepper motor is “digital”. For each pulse signal from the controller, the stepper motor driven by its drive runs at a fixed angle.
Rtelligent A/AM series stepper motor is designed based on the Cz optimized magnetic circuit and adopts stator and rotator materials of high magnetic density, featuring a high energy efficiency. -
High-Performance AC Servo Drive
RS series AC servo is a general servo product line developed by Rtelligent , covering the motor power range of 0.05 ~ 3.8kw. RS series supports ModBus communication and internal PLC function, and RSE series supports EtherCAT communication . RS series servo drive has a good hardware and software platform to ensure that it can be very suitable for fast and accurate position, speed, torque control applications.
• Matching motor power below 3.8kW
• High speed response bandwidth and shorter positioning time
• With 485 communication function
• With orthogonal pulse mode
• With frequency division output function
-
5-Pole Pairs High Performanc AC Servo Motor
Rtelligent RSN series AC servo motors, based on Smd optimized magnetic circuit design, use high magnetic density stator and rotor materials, and have high energy efficiency.
Multiple types of encoders are available, including optical, magnetic, and multi-turn absolute encoder.
• RSNA60/80 motors have more compact size, saving installation cost.
• Permanent magnet brake is optional, moves flexible, suit for Z -axis applications.
• Brake optional or Bake for option
• Multi type of encoder available
• IP65/IP66 Optional or IP65/66 for option
-
Introduction to the AC servo motor of the RSNA
Rtelligent RSN series AC servo motors, based on Smd optimized magnetic circuit design, use high magnetic density stator and rotor materials, and have high energy efficiency.
Multiple types of encoders are available, including optical, magnetic, and multi-turn absolute encoder.
RSNA60/80 motors have more compact size, saving installation cost.
Permanent magnet brake is optional, moves flexible, suit for Z -axis applications.
Brake optional or Bake for option
Multi type of encoder available
IP65/IP66 Optional or IP65/66 for option
-
Fieldbus Open loop Stepper Drive ECT60X2
The EtherCAT fieldbus open loop stepper drive ECT60X2 is based on the CoE standard framework and complies with the CiA402 standard. The data transmission rate is up to 100Mb/s, and supports various network topologies.
ECT60X2 matches open loop stepper motors below 60mm.
• Control modes: PP, PV, CSP, CSV, HM, etc
• Power supply voltage: 18-80V DC
• Input and output: 8-channel 24V common positive input; 4-channel optocoupler isolation outputs
• Typical applications: assembly lines, lithium battery equipment, solar equipment, 3C electronic equipment, etc
-
Fieldbus Stepper Drive NT60
485 fieldbus stepper drive NT60 is based on RS-485 network to run Modbus RTU protocol. The intelligent motion control
function is integrated, and with external IO control, it can complete functions such as fixed position/fixed speed/multi
position/auto-homing
NT60 matches open loop or closed loop stepper motors below 60mm
• Control mode: fixed length/fixed speed/homing/multi-speed/multi-position
• Debugging software: RTConfigurator (multiplexed RS485 interface)
• Power voltage: 24-50V DC
• Typical applications: single axis electric cylinder, assembly line, connection table, multi-axis positioning platform, etc
